|
- Cobalt, chrome, high tungsten
- Retains hardness at temperatures exceeding 1400°F (760°C)
- These key features are universal to all WT-12 product forms
| WT-1 Bare Cast Rod (OAW, GTAW/TIG) |
- Shear Blades
- Fluid Flow Valves
- Extrusion Screws
- Roll Bushings
- High Temperature
- Valve Bearing Surface
|
- Cobalt, high chromium, tungsten
- Excellent for corrosion resistance, wear and galling
- Most flexible and widely used of the cobalt alloys due to overall performance
- Retains hardness up to 930ºF (500ºC)
- These key features are universal to all WT-6 product forms
| WT-6 Bare Cast Rod (OAW, GTAW/TIG) |
- Chain Saw Bars
- Saw Teeth
- Extrusion Dies
|
- Cobalt, very high chromium, high carbon, high tungsten
- High resistance to corrosion and galling at elevated temperatures
- Maintains hardness up to 1300ºF (700ºC)
- Intermediate alloy between WT-1 and WT-6
- These key features are universal to all WT-12 product forms
| WT-12 Bare Cast Rod (OAW, GTAW/TIG) |
- Steam Valves
- Hot Shears
- Chemical and Petrochemical Valves
- Cavation Repair
- Forging Dies
|
- Cobalt, high chromium, molybdenum
- Excellent for corrosion resistance, galling, cavitation, and metal to metal wear resistance
- Not recommended for severe abrasion
- These key features are universal to all WT-21 product forms
| WT-21 Bare Cast Rod (OAW, GTAW/TIG) |
- Liners
- Valve Components
- Oil Extrusion Screws
|
- Resists abrasion, corrosion, galling, and pitting
- Can be deposited on cast iron and low-tomedium carbon steels
- Retains hardness up to 1200ºF (650ºC)
- These key features are universal to all WT-50 product forms
| WT-40 Bare Cast Rod (OAW, GTAW/TIG) |
- Liners
- Valve Components
- Oil Extrusion Screws
- Centrifuges
|
- Resists abrasion, corrosion, galling, and pitting
- Can be deposited on cast iron and low-tomedium carbon steels
- Retains hardness up to 1200ºF (650ºC)
- These key features are universal to all WT-50 product forms
| WT-Bare Cast Rod (OAW, GTAW/TIG) |
- Plastic Extrusion Flight Screws
- Valve Components
- Impeller Screws
- Shaft Sleeves
|
- Smooth and machinable weld deposits
- Resists abrasion, galling, corrosion, and pitting
- Retains hardness up to 1200ºF (650ºC)
| WT-56 Bare Cast Rod (OAW, GTAW/TIG) |
